產品詳情
漆霧氈
Paint Stop Filter
產品特性
·采用玻璃長纖維以非織物方式制成, ,透風量大,其阻力小,對漆霧Over-spray捕塵效率佳。
·應用于表面噴涂高質量漆霧過濾；捕捉率高PA-50/60/PA-100尤其適合應用開熱回收系統；
·高強度的玻璃纖維遞增結構；迎風面為綠色，出風面為白色。
·低壓縮性能保持其外型不變，使其過濾纖維完全有利于儲存油霧灰塵。
·難燃性,可耐溫170℃。
·壓縮包裝在運輸上可節省運費及儲存空間，放松后仍可恢復原來狀態。
·外框搭配可選擇紙外框和鍍鋅鐵框或鋁合金框材質。
Speciality:
·Made of long fiberglass in non-woven way, large ventilation quantity, small resistance, good efficiency of the dust arrestance for the over-spray.
·It is applied to the superficial spray coating high quality painting-spray filtration, high dust catching, specially , PA-50/60/PA-100 is suitable for using heat recovery system
·High strength fiberglass increasing structure; the windward side is green ,the leeward side is white.。
·The low compression perbance maintains its outlook，which is compleby useful for the filtration fibre to keep the oil mist and the dust
·Nonflammability, heat resistance 170℃
·The compression packing may save the fare and the storage space in the transportation. After decompression, it will regain its original condition
·Outer frame may choose the paper frame , the galvanization iron frame, or aluminium alloy frame.
用途
一般空調系統之粗塵過濾,干式噴漆臺，汽車噴漆房之排氣系統，減少對環境的污染，環保。(用于各種工業用途，如防治污染、公共建設、空調業、電子業、制藥業、食品業等)
Using:
Thick dust filtration for the general air-condition system.
Applied to the dry spray painting platb and the exhaust gas system of the automobile spray painting room.It is environment-friendly, reducing the pollution to the environment
性能參數
|
型號 Model |
PA-50/60 |
PA-100 |
|
平均計重效率 Avg.arrestance(acc.EN779) |
92%-96% |
97%-99% |
|
初阻力Initial pessure drop |
15Pa |
20Pa |
|
終阻力Final pessure drop |
250Pa |
280Pa |
|
風速 Air velocity |
0.7-1.75m/s |
0.7-1.75m/s |
|
最大容塵量 Dust holding at tested final |
3200-3600 g/㎡ |
3600-4900g/㎡ |
|
最高耐溫Temp.resistance,const |
170℃ |
170℃ |
|
瞬間溫度Temp.short peaks |
190℃ |
190℃ |
|
厚度 Normal thickness |
50/60mm |
100mm |
|
標準尺寸（M）Roll sizes standard |
0.8*20 1.0*20 2.0*20 |
0.8*20 1.0*20 2.0*20 |
注：可按客戶要求訂做
Note: Other specifications are available on request.
