產品詳情
日新衛生型離心泵可廣泛適用于各類液體物料的輸送.如乳品,啤酒,飲料,醫藥,生物工程,精細化工等領域.它不但可以輸送普通的低,中粘度溶液,也可以輸送含懸浮物或有腐蝕性的溶液.日新衛生型離心泵的形式工業基礎單級,單級,開式葉輪.泵殼,葉輪經精心設計,減小了阻力,徹底消滅了衛生死角.由于其特殊的結構,所以提高了泵內液體的流速,從而提高了泵的整體性能,且易于清洗,具有卓越的衛生性能.它可以滿足產品對衛生,柔性處理的要求并具有耐化學腐蝕性能.
標準設計:
SCP泵由以下部分組成:標準的馬達,葉輪,泵殼,衛生機械密封.它具有專為就地清洗系統(CIP)設計的內部無死角和可清洗的密封.SCP泵有一個不銹鋼的外罩可保護馬達,還有四個可調節的不銹鋼支腳.
軸封:
SCP泵裝有一個平衡型單端面機械密封或一個可沖洗的平衡型單端面機械密封.這兩種機械密封的靜環由AISI316L鋼內嵌碳化硅或石墨構成,動環則由碳化硅制成.可沖洗機械密封的輔助密封是一個經久耐用的唇形密封.SCP10B~SCP25B型泵的機械密封為雙端面機械密封.
Application
Nissin sanitary pump is applicable in conveying all kinds of liquid material in the industries of Dairy, Beer, Beverage pharmaceutical and chemistry .it conveys not only normal low or middle viscous solutions but also suspension and corrosive fluids .nissin sanitary centrifugal pump has types of single state, single suction and open styled impeller. with its elaborate design in shell and impeller, resistance is reduced and unhygienic dead angle is thoroughly eliminated, due to its special structure, the liquid flow speed in the pump is promoted to its whole perbance, also it has an easy access for cleaning which presents its outstanding sanitary features, it meets the product gentle treatment requirements as well as anti-chemical-chemical-corrosive character
Standard design
the SCP pump consist of a standard motor, impeller, pump casing and sanitary mechanical shaft seal, the SCP pump is designed for CIP with emphasis on large internal rounding and cleanable seals, SCP has a stainless steel shroud for protection of the motor ,and the complete unit is supported on four adjustable stainless steels.
Shaft seal
The SCP pump is equipped with either an single or a flushed shaft seal, both have stationary seal rings in acid resistant steel AISI316Lwith sealing surface in carbon or carbide and rotating seal rings in silicon carbide. the secondary seal of the flushed seal is a long lasting lip seal.SCP10B to 25Bbmay also be equipped with a double mechanical shaft seal.
材質:
過液部分材質: AISI316L不銹鋼
其它部分材質: AISI304不銹鋼
外表面: 鈦色
內表面: 拋光
過液密封材料: EPDM乙丙橡膠
技術參數:
最大入口壓力: 0.5MPa
溫度范圍: -10℃到140℃(EPDM)
噪聲水平(1米處) 小于85dB(A)
可沖洗密封:
水壓: 最高0.1 MPa
水量: 0.25-0.5L/min
雙端面密封:
水壓: 最高0.6 MPa
水量: 0.25-0.5L/min
電壓和頻率: 3-,50HZ,220～240V/380～420V/660～690V, ⊿/Y
電機型號: 50HZ:1.5,2.2,3,4,5.5,7.5,11,15KW
Materials
Product wetted steel parts: acid resistant steel AISI316L
Other steel parts: stainless steel aisi304
Outside surface: Ti
Inside surface: bright
Product wetted seals: EPDM rubber
Technical date
Max. Inlet pressure: 0.5MPa
Temperature range: -10℃to+140℃(EPDM)
Noise level (at1m) <85dB (A)
Flushed seal
Water pressure: max.0.1 MPa
Water consumption: 0.25-0.5l/min
Double mechanical seal:
Water pressure: max.0.6 MPa
Water consumption: 0.25-0.5l/min
Voltage and frequency:3-,50HZ,220～240V/380～420V/660～690V, ⊿/Y
Motor sixes: 50HZ: 1.5, 2.2, 3, 4, 5.5, 7.5, 11,15KW
衛生型離心泵介紹:
配用電機:
1電機按照國際標準設計制造
國際電工委員會IEC34,IEC72
英國標準BS4999-5000
澳大利亞標準AS1359-2
德國DIN42673
符合歐共體”CE”標記要求
2電機符合下列標準
GB755-87
GB10069-88.
Q/JBQS28-2000
3合理的結構設計
靈活的引出線方向
4優越的電氣性能
低躁音,低振動
高性能的防護等級
電機的標準設計防護等級為IP55,可按用戶要求提供更高要求的防護等級
適用雙頻率,寬電壓使用
電機設計考慮了不同地區的電壓變化,使電機適應多個地區電壓使用,并保證用戶使用性能.
提高絕緣等級,增加電機使用壽命.
