產品詳情
RMP600RMP600 is the latest generation compact radio transmission probe usingstrain gage technology. Measuring only 63?mm in diameter and 76?mmin length, with an omni-directional
transmission distance of 15?m, it isideal for use on all machine tools. RMP600 features an integrated probemodule delivering exceptional robustness and generous overtravel.It delivers interference-
free transmission through the use of FHSS(frequency hopping spread spectrum). RMP600 complies with FCCregulations and operates in the 2.4?GHz range.RMP600 supports three bs of probe
activation:Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer.Spin-on The
probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer. Machine tool probesSwitch-on The probe is turned on and off via a
switch incorporated into the shank, activated when the probe is loaded into the spindle.Sense directions ±X, ±Y, +Z 2-15Stylus overtravel X and Y: ±15° Z: 11 mm (0.43 in) RMP600 probe kitStylus
trigger force X and Y: 10 gfUnidirectional repeatability Z: 193 gf Includes: RMP600 probe 0.25 μm (0.00001 in) AA battery (2) Tool kitRMP600 retrofit kit Part number: A-5312-0001 : 廈門紀揚
7,000Includes: RMP600 probe RMI radio machine interface RMI radio machine interface Receiver mounting bracket Part number: A-4113-0050 : 廈門紀揚2,559 50 mm and 100 mm carbon
fiber styli Sealtite kit Receiver mounting bracket : 廈門紀揚119 Renishaw Inspection Plus software Part number: A-2033-0830 Installation and application supportA shank is not included in
this kit. See section entitled Shanks and Sealtite conduitToolholders for and part number inbation. 5/16 in conduit, 1?m long. Includes one fitting.Part number: RMP600-NS-S (Available at a
fixed ) Part number: A-4113-0306 : 廈門紀揚27 Call for detailsNote: The retrofit questionnaire at the end of this section must be filled RMP600 upgrade kitout and returned to Renishaw
before a retrofit order can be processed. Current users of MP14, MP16 or MP18 radio probesRMP600 hardware only kit may upgrade to RMP600. A complete working system (MP3 probe, transmission
system, MI14 or MI16Includes: RMP600 probe interface and RMM antennas) must be exchanged. RMI radio machine interface Receiver mounting bracket Includes: RMP600 probe 50 mm
and 100 mm carbon fiber styli RMI radio machine interface Sealtite kit Receiver mounting bracket Sealtite kitPart number: RMP600-NS-KIT : 廈門紀揚10,032 Part number: RI-5312-0001
: 廈門紀揚6,440
Shanks and Toolholders Shanks for OMP40, OMP400 and RMP40 Part number Debion Shanks for OMP60, MP11, MP700, M-4071-0050 CAT30 廈門紀揚413 RMP60 and
RMP600 (spin-on, 廈門紀揚368 optical-on, radio-on) systems M-4071-0058 CAT40 廈門紀揚368 廈門紀揚425 M-4071-0072 CAT50 廈門紀揚368 廈門紀揚368 M-4071-0049 BT30
廈門紀揚413 廈門紀揚395 Part number Debion M-4071-0057 BT40 廈門紀揚482 廈門紀揚482 M-2045-0068 CAT30 廈門紀揚368 M-4071-0071 BT50 廈門紀揚482 廈門
紀揚368 廈門紀揚482 M-2045-0069 CAT40 廈門紀揚818 M-4071-0048 ISO30 DIN69871 廈門紀揚482 廈門紀揚368 廈門紀揚649 M-2045-0138 CAT45 廈門紀揚1,700 M-4071-0069 ISO40
DIN69871 廈門紀揚568 廈門紀揚368 廈門紀揚791 M-2045-0071 CAT50 廈門紀揚368 M-4071-0044 HSK E25 廈門紀揚822 廈門紀揚368 廈門紀揚822 M-2045-0292 CAT60 廈門紀揚
368 M-4071-0055 HSK E32 廈門紀揚822 廈門紀揚693 M-2045-0077 BT30 廈門紀揚826 M-4071-0054 HSK E40 廈門紀揚887 M-2045-0027 BT40 廈門紀揚1,074 M-4071-0045 HSK
A32 廈門紀揚1,077 M-2045-0038 BT45 廈門紀揚218 M-4071-0046 HSK A40 廈門紀揚218Machine tool probes M-2045-0073 BT50 廈門紀揚218 M-4071-0047 HSK A50 廈門紀揚750 M-
2045-0186 HSK A40 廈門紀揚995 M-4071-0129 HSK A63 廈門紀揚676 M-2045-0187 HSK A50 廈門紀揚1,672 M-4071-0141 CAPTO C4 廈門紀揚1,388 M-2045-0188 HSK A63 廈門紀揚
1,388 M-4071-0066 CAPTO C5 M-2045-0189 HSK A80 M-4071-0067 CAPTO C6 M-2045-0190 HSK A100 M-4071-0065 KM63 2-16 A-2045-0243
? in straight shank A-2030-0252 1 in straight shank OMP40, OMP400 and RMP40 shank kits A-2030-0211 25 mm straight shank M-2045-0313 CAPTO C4 CAT40 shank kit
M-2045-0346 CAPTO C5 Includes: CAT40 shank OMP60/RMP60 shank adaptor M-2045-0310 CAPTO C6 Part number: M-4071-0058-RI M-2045-0311 CAPTO C8
M-2045-0335 KM63 M-2045-1831591 KM63Y (Mazak) : 廈門紀揚539 Calibration masters BT40 shank kit Calibration tools Includes: BT40 shank OMP60/RMP60 shank adaptor Part number
Debion : 廈門紀揚539 Part number: M-4071-0057-RI 廈門紀揚431 M-2253-0954 CAT40 廈門紀揚539 Shanks for OLP40 and RLP40 M-2253-0955 CAT50 廈門紀揚697 M-2253-1562
BT30 廈門紀揚431 Part number Debion M-2253-1263 BT40 廈門紀揚539 M-2253-1262 BT50 A-5625-1003 25 mm straight shank 廈門紀揚218 A-5625-1004
? in straight shank 廈門紀揚218 A-5625-1007 1 in straight shank 廈門紀揚218
Tool setting probes for machining centersNC3 tool setterNC3 is a non-contact tool setter, available in a fixed configurationand offered in a single size. NC3 is compact and designed toaccommodate
tools up to 80?mm diameter making it ideal forsmall to medium machining centers and special applications.Repeatability ±0.15 μm (0.000006 in)Tool diameter Min: 0.20 mm (0.008 in) Measurement
Max: 80 mm (3.15 in) Off-center 100 mm (3.94 in) Breakage Min: 0.10 mm (0.0039 in)NC3 fixed system kit Machine tool probesIncludes: NC3 fixed unit with 10 m integral cable 2-17 NCi-5
interface Air regulator kit ?17 mm OD × 4 m conduit Mounting platePart number: A-4179-1100 : 廈門紀揚4,531NC3 fixed unit only NC3 air regulator kitIncludes: NC3 fixed unit with 10 m
integral cable Part number: A-4179-1600 : 廈門紀揚443Part number: A-4179-1500 : 廈門紀揚3,631 NC3 air filter service kit Part number: P-FI01-S002 NC3 fixed system retrofit kit : 廈門紀揚147NC3
retrofit kit includes all items above plus the following: Steel sheath conduit Tool setting software ?17 mm OD × 1 m length, for cable protection. Installation and application supportPart number: NC3
-F135-S : Call for details Part number: P-HO01-0008 : 廈門紀揚23NCi-5 interface 45° mounting bracketPart number: A-5259-2000 : 廈門紀揚226 Part number: A-4179-1501 : 廈門紀揚97 NC3
air nozzle kit Part number: A-4179-0450 : 廈門紀揚81
NC4 tool setter NC4 fixed kits NC4 is a non-contact tool setter and our most compact design. NC4 F300/225 with NCi-5 kit NC4 is available in fixed or separate configurations. NC4F (fixed) is available
in four different sizes. NC4S (separate) systems are Separation 225 mm user-configurable operating between 500?mm and 5?m. Part number: NC4-F300-Modular-kit : 廈門紀揚4,781
Repeatability ±1.0 μm (0.00004 in) Minimum tool Measurement 0.03 mm (0.0012 in) NC4 F300/240 with NCi-5 kit diameter Breakage 0.03 mm (0.0012 in) Separation 240 mm Part number: NC4-F300-
kit NC4 fixed system retrofit kits : 廈門紀揚4,781 Include: NC4 fixed unit with 12.5 m cable NC4 F230/170 with NCi-5 kit NCi-5 interface Air regulator kit Separation 170 mm ?22?mm OD steel
braided conduitMachine tool probes Mounting plate Part number: NC4-F230-kit : 廈門紀揚4,781 Tool setting software Installation and application support NC4 F145/85 with NCi-5 kit Part
numbers: NC4-F300-Modular-S * Separation 85 mm : 廈門紀揚4,781 NC4-F300-S * Part number: NC4-F145-kit NC4-F230-S *2-18 NC4-F145-S * NC4 F115/55 with NCi-5 kit NC4-F115-S * NC4-F95-S
* Separation 55 mm : 廈門紀揚4,781 Part number: NC4-F115-kit NC4 separate system retrofit kits NC4 F95/23 with NCi-5 kit Include: NC4 separate unit with 12.5 m cable Separation 23 mm :
廈門紀揚4,781 NCi-5 interface Part number: NC4-F95-kit Air regulator kit ?17?mm OD steel braided conduit NC4 separate kits Tool setting software Installation and application support NC4 S800 with
NCi-5 kit Part numbers: NC4-S800-S * Separation 500 mm – 800 mm : 廈門紀揚4,747 NC4-S1500-S * Part number: A-4114-5060 : 廈門紀揚4,747 NC4-S2000-S * : 廈門紀揚4,747 NC4-S3000-S * NC4
S1500 with NCi-5 kit : 廈門紀揚4,747 NC4-S5000-S * : 廈門紀揚4,747 Separation 800 mm – 1500 mm Note: When ordering a separate system retrofit kit, the customer Part number: A-4114-5065 must
select an NC4 based on its operating range. In addition, the customer must select tool setting software based on the NC4 S2000 with NCi-5 kit control type. Brackets and an adjusting b (see
following page) are also needed for NC4 separate systems. These Separation 1500 mm – 2000 mm are not included with NC4 separate systems and must be Part number: A-4114-5070 ordered
additionally. Mounting brackets for various machines are continually developed. Contact Renishaw for the latest list NC4 S3000 with NCi-5 kit of compatibility. Bracket installation is not included with
the standard separate system retrofit , this service can be Separation 2000 mm – 3000 mm quoted upon request. Part number: A-4114-5075 * Available at a fixed . Call for details. NC4 S5000 with
NCi-5 kit Separation 3000 mm – 5000 mm Part number: A-4114-5080
NC4 tool kit : 廈門紀揚43 Steel sheath conduit 22 mm OD × 1 mPart number: A-4114-4110 : 廈門紀揚443NC4 air regulator kit : 廈門紀揚147 For NC4 fixed cable protection.Part number: A-2253-5120 : 廈
門紀揚226NC4 air filter service kit Part number: P-HO01-0011 : 廈門紀揚23Part number: P-FI01-S002 : 廈門紀揚22NCi-5 interface : 廈門紀揚22 Steel sheath conduit 17 mm OD × 1 mPart number: A-5259
-2000 : 廈門紀揚22NC4 access panel 0.2 For NC4 separate cable protection.Part number: A-4114-0082NC4 access panel 0.4 Part number: P-HO01-0008 : 廈門紀揚23Part number: A-4114-0084NC4 access
panel 0.6 NC4F 90-degree cable exit kitPart number: A-4114-0086 Part number: P-CA61-0068 : 廈門紀揚22 Part number: P-CA61-0069 : 廈門紀揚22 NC4F air blast nozzle and bracket Machine tool
probes Part number: A-5450-0480 : 廈門紀揚305 Solenoid kit : 廈門紀揚850 2-19 Part number: A-5450-0490NC4 set-up tool : 廈門紀揚342Part number: A-4114-8000NC4S mounting hardware options1.
NC4 spacer plate – separate 2Part number: A-4114-4400 : 廈門紀揚1022. NC4 adjuster pack – separate 1Part number: A-4114-3100 : 廈門紀揚228
OTS The OTS is a new optical transmission tool setter for vertical and OTS ?AA horizontal machining centers. Modeled on the TS27R, OTS can set tool length and diameter of rotating tools and
perb broken tool detection. OTS is available in two configurations – OTS ?AA and OTS AA. OTS can be used with the OMI?2, OMI?2T or OMM-2/OSI interface. OMI-2T or OMM-2/OSI must be used
if OTS is to be paired with another optical transmission probe. Sense directions ±X, ±Y, +Z X and Y: ±10° Stylus overtravel Z: 5.5 mm (0.21 in) 130 gf – 240 gf Stylus trigger force 1.0 μm (0.00004 in)
Unidirectional repeatabilityMachine tool probes OTS retrofit kit OTS AA2-20 Includes: OTS ?AA or OTS AA probe OMM-2 optical receiver OMI-2T Receiver mounting bracket Part number: A-5492-0051
: 廈門紀揚986 Sealtite kit Renishaw tool setting software OMI-2 optical receiver Installation and application support Part number: A-5191-0049 : 廈門紀揚1,582 Part number: OTS-S (?AA configuration)
Part number: OTSAA-S (AA configuration) Available at fixed – call for details. Note: The retrofit questionnaire at the end of this section must be filled out and returned to Renishaw before a retrofit
order can be processed. OTS hardware only kit OMI-2T optical receiver Includes: OTS ?AA probe or OTS AA probe Part number: A-5439-0049 : 廈門紀揚1,582 OMI-2T Receiver mounting
bracket Receiver mounting bracket Sealtite kit Part number: A-2033-0830 : 廈門紀揚119 Part number: OTS-KIT : 廈門紀揚4,053 Part number: OTSAA-KIT : 廈門紀揚4,053 OTS ?AA probe kit
OSI interface Includes: OTS probe Part number: A-5492-2000 : 廈門紀揚931 ? AA battery (2) Tool kit Sealtite conduit for OMM-2, OMI-2 or OMI-2T Part number: A-5401-2001 : 廈門紀揚2,271
5/16 in conduit, 1 m long. Includes one fitting. OTS AA probe kit Part number: A-4113-0306 : 廈門紀揚27 Includes: OTS probe AA battery (2) Tool kit Part number: A-5514-2001 : 廈門紀
揚2,271
transmission distance of 15?m, it isideal for use on all machine tools. RMP600 features an integrated probemodule delivering exceptional robustness and generous overtravel.It delivers interference-
free transmission through the use of FHSS(frequency hopping spread spectrum). RMP600 complies with FCCregulations and operates in the 2.4?GHz range.RMP600 supports three bs of probe
activation:Radio-on The probe is turned on via an RF signal produced by the RMI and initiated by an M code. The probe is turned off via an RF signal or the internal timer.Spin-on The
probe is turned on via an internal centrifugal switch. The probe is turned off via the centrifugal switch or the internal timer. Machine tool probesSwitch-on The probe is turned on and off via a
switch incorporated into the shank, activated when the probe is loaded into the spindle.Sense directions ±X, ±Y, +Z 2-15Stylus overtravel X and Y: ±15° Z: 11 mm (0.43 in) RMP600 probe kitStylus
trigger force X and Y: 10 gfUnidirectional repeatability Z: 193 gf Includes: RMP600 probe 0.25 μm (0.00001 in) AA battery (2) Tool kitRMP600 retrofit kit Part number: A-5312-0001 : 廈門紀揚
7,000Includes: RMP600 probe RMI radio machine interface RMI radio machine interface Receiver mounting bracket Part number: A-4113-0050 : 廈門紀揚2,559 50 mm and 100 mm carbon
fiber styli Sealtite kit Receiver mounting bracket : 廈門紀揚119 Renishaw Inspection Plus software Part number: A-2033-0830 Installation and application supportA shank is not included in
this kit. See section entitled Shanks and Sealtite conduitToolholders for and part number inbation. 5/16 in conduit, 1?m long. Includes one fitting.Part number: RMP600-NS-S (Available at a
fixed ) Part number: A-4113-0306 : 廈門紀揚27 Call for detailsNote: The retrofit questionnaire at the end of this section must be filled RMP600 upgrade kitout and returned to Renishaw
before a retrofit order can be processed. Current users of MP14, MP16 or MP18 radio probesRMP600 hardware only kit may upgrade to RMP600. A complete working system (MP3 probe, transmission
system, MI14 or MI16Includes: RMP600 probe interface and RMM antennas) must be exchanged. RMI radio machine interface Receiver mounting bracket Includes: RMP600 probe 50 mm
and 100 mm carbon fiber styli RMI radio machine interface Sealtite kit Receiver mounting bracket Sealtite kitPart number: RMP600-NS-KIT : 廈門紀揚10,032 Part number: RI-5312-0001
: 廈門紀揚6,440
Shanks and Toolholders Shanks for OMP40, OMP400 and RMP40 Part number Debion Shanks for OMP60, MP11, MP700, M-4071-0050 CAT30 廈門紀揚413 RMP60 and
RMP600 (spin-on, 廈門紀揚368 optical-on, radio-on) systems M-4071-0058 CAT40 廈門紀揚368 廈門紀揚425 M-4071-0072 CAT50 廈門紀揚368 廈門紀揚368 M-4071-0049 BT30
廈門紀揚413 廈門紀揚395 Part number Debion M-4071-0057 BT40 廈門紀揚482 廈門紀揚482 M-2045-0068 CAT30 廈門紀揚368 M-4071-0071 BT50 廈門紀揚482 廈門
紀揚368 廈門紀揚482 M-2045-0069 CAT40 廈門紀揚818 M-4071-0048 ISO30 DIN69871 廈門紀揚482 廈門紀揚368 廈門紀揚649 M-2045-0138 CAT45 廈門紀揚1,700 M-4071-0069 ISO40
DIN69871 廈門紀揚568 廈門紀揚368 廈門紀揚791 M-2045-0071 CAT50 廈門紀揚368 M-4071-0044 HSK E25 廈門紀揚822 廈門紀揚368 廈門紀揚822 M-2045-0292 CAT60 廈門紀揚
368 M-4071-0055 HSK E32 廈門紀揚822 廈門紀揚693 M-2045-0077 BT30 廈門紀揚826 M-4071-0054 HSK E40 廈門紀揚887 M-2045-0027 BT40 廈門紀揚1,074 M-4071-0045 HSK
A32 廈門紀揚1,077 M-2045-0038 BT45 廈門紀揚218 M-4071-0046 HSK A40 廈門紀揚218Machine tool probes M-2045-0073 BT50 廈門紀揚218 M-4071-0047 HSK A50 廈門紀揚750 M-
2045-0186 HSK A40 廈門紀揚995 M-4071-0129 HSK A63 廈門紀揚676 M-2045-0187 HSK A50 廈門紀揚1,672 M-4071-0141 CAPTO C4 廈門紀揚1,388 M-2045-0188 HSK A63 廈門紀揚
1,388 M-4071-0066 CAPTO C5 M-2045-0189 HSK A80 M-4071-0067 CAPTO C6 M-2045-0190 HSK A100 M-4071-0065 KM63 2-16 A-2045-0243
? in straight shank A-2030-0252 1 in straight shank OMP40, OMP400 and RMP40 shank kits A-2030-0211 25 mm straight shank M-2045-0313 CAPTO C4 CAT40 shank kit
M-2045-0346 CAPTO C5 Includes: CAT40 shank OMP60/RMP60 shank adaptor M-2045-0310 CAPTO C6 Part number: M-4071-0058-RI M-2045-0311 CAPTO C8
M-2045-0335 KM63 M-2045-1831591 KM63Y (Mazak) : 廈門紀揚539 Calibration masters BT40 shank kit Calibration tools Includes: BT40 shank OMP60/RMP60 shank adaptor Part number
Debion : 廈門紀揚539 Part number: M-4071-0057-RI 廈門紀揚431 M-2253-0954 CAT40 廈門紀揚539 Shanks for OLP40 and RLP40 M-2253-0955 CAT50 廈門紀揚697 M-2253-1562
BT30 廈門紀揚431 Part number Debion M-2253-1263 BT40 廈門紀揚539 M-2253-1262 BT50 A-5625-1003 25 mm straight shank 廈門紀揚218 A-5625-1004
? in straight shank 廈門紀揚218 A-5625-1007 1 in straight shank 廈門紀揚218
Tool setting probes for machining centersNC3 tool setterNC3 is a non-contact tool setter, available in a fixed configurationand offered in a single size. NC3 is compact and designed toaccommodate
tools up to 80?mm diameter making it ideal forsmall to medium machining centers and special applications.Repeatability ±0.15 μm (0.000006 in)Tool diameter Min: 0.20 mm (0.008 in) Measurement
Max: 80 mm (3.15 in) Off-center 100 mm (3.94 in) Breakage Min: 0.10 mm (0.0039 in)NC3 fixed system kit Machine tool probesIncludes: NC3 fixed unit with 10 m integral cable 2-17 NCi-5
interface Air regulator kit ?17 mm OD × 4 m conduit Mounting platePart number: A-4179-1100 : 廈門紀揚4,531NC3 fixed unit only NC3 air regulator kitIncludes: NC3 fixed unit with 10 m
integral cable Part number: A-4179-1600 : 廈門紀揚443Part number: A-4179-1500 : 廈門紀揚3,631 NC3 air filter service kit Part number: P-FI01-S002 NC3 fixed system retrofit kit : 廈門紀揚147NC3
retrofit kit includes all items above plus the following: Steel sheath conduit Tool setting software ?17 mm OD × 1 m length, for cable protection. Installation and application supportPart number: NC3
-F135-S : Call for details Part number: P-HO01-0008 : 廈門紀揚23NCi-5 interface 45° mounting bracketPart number: A-5259-2000 : 廈門紀揚226 Part number: A-4179-1501 : 廈門紀揚97 NC3
air nozzle kit Part number: A-4179-0450 : 廈門紀揚81
NC4 tool setter NC4 fixed kits NC4 is a non-contact tool setter and our most compact design. NC4 F300/225 with NCi-5 kit NC4 is available in fixed or separate configurations. NC4F (fixed) is available
in four different sizes. NC4S (separate) systems are Separation 225 mm user-configurable operating between 500?mm and 5?m. Part number: NC4-F300-Modular-kit : 廈門紀揚4,781
Repeatability ±1.0 μm (0.00004 in) Minimum tool Measurement 0.03 mm (0.0012 in) NC4 F300/240 with NCi-5 kit diameter Breakage 0.03 mm (0.0012 in) Separation 240 mm Part number: NC4-F300-
kit NC4 fixed system retrofit kits : 廈門紀揚4,781 Include: NC4 fixed unit with 12.5 m cable NC4 F230/170 with NCi-5 kit NCi-5 interface Air regulator kit Separation 170 mm ?22?mm OD steel
braided conduitMachine tool probes Mounting plate Part number: NC4-F230-kit : 廈門紀揚4,781 Tool setting software Installation and application support NC4 F145/85 with NCi-5 kit Part
numbers: NC4-F300-Modular-S * Separation 85 mm : 廈門紀揚4,781 NC4-F300-S * Part number: NC4-F145-kit NC4-F230-S *2-18 NC4-F145-S * NC4 F115/55 with NCi-5 kit NC4-F115-S * NC4-F95-S
* Separation 55 mm : 廈門紀揚4,781 Part number: NC4-F115-kit NC4 separate system retrofit kits NC4 F95/23 with NCi-5 kit Include: NC4 separate unit with 12.5 m cable Separation 23 mm :
廈門紀揚4,781 NCi-5 interface Part number: NC4-F95-kit Air regulator kit ?17?mm OD steel braided conduit NC4 separate kits Tool setting software Installation and application support NC4 S800 with
NCi-5 kit Part numbers: NC4-S800-S * Separation 500 mm – 800 mm : 廈門紀揚4,747 NC4-S1500-S * Part number: A-4114-5060 : 廈門紀揚4,747 NC4-S2000-S * : 廈門紀揚4,747 NC4-S3000-S * NC4
S1500 with NCi-5 kit : 廈門紀揚4,747 NC4-S5000-S * : 廈門紀揚4,747 Separation 800 mm – 1500 mm Note: When ordering a separate system retrofit kit, the customer Part number: A-4114-5065 must
select an NC4 based on its operating range. In addition, the customer must select tool setting software based on the NC4 S2000 with NCi-5 kit control type. Brackets and an adjusting b (see
following page) are also needed for NC4 separate systems. These Separation 1500 mm – 2000 mm are not included with NC4 separate systems and must be Part number: A-4114-5070 ordered
additionally. Mounting brackets for various machines are continually developed. Contact Renishaw for the latest list NC4 S3000 with NCi-5 kit of compatibility. Bracket installation is not included with
the standard separate system retrofit , this service can be Separation 2000 mm – 3000 mm quoted upon request. Part number: A-4114-5075 * Available at a fixed . Call for details. NC4 S5000 with
NCi-5 kit Separation 3000 mm – 5000 mm Part number: A-4114-5080
NC4 tool kit : 廈門紀揚43 Steel sheath conduit 22 mm OD × 1 mPart number: A-4114-4110 : 廈門紀揚443NC4 air regulator kit : 廈門紀揚147 For NC4 fixed cable protection.Part number: A-2253-5120 : 廈
門紀揚226NC4 air filter service kit Part number: P-HO01-0011 : 廈門紀揚23Part number: P-FI01-S002 : 廈門紀揚22NCi-5 interface : 廈門紀揚22 Steel sheath conduit 17 mm OD × 1 mPart number: A-5259
-2000 : 廈門紀揚22NC4 access panel 0.2 For NC4 separate cable protection.Part number: A-4114-0082NC4 access panel 0.4 Part number: P-HO01-0008 : 廈門紀揚23Part number: A-4114-0084NC4 access
panel 0.6 NC4F 90-degree cable exit kitPart number: A-4114-0086 Part number: P-CA61-0068 : 廈門紀揚22 Part number: P-CA61-0069 : 廈門紀揚22 NC4F air blast nozzle and bracket Machine tool
probes Part number: A-5450-0480 : 廈門紀揚305 Solenoid kit : 廈門紀揚850 2-19 Part number: A-5450-0490NC4 set-up tool : 廈門紀揚342Part number: A-4114-8000NC4S mounting hardware options1.
NC4 spacer plate – separate 2Part number: A-4114-4400 : 廈門紀揚1022. NC4 adjuster pack – separate 1Part number: A-4114-3100 : 廈門紀揚228
OTS The OTS is a new optical transmission tool setter for vertical and OTS ?AA horizontal machining centers. Modeled on the TS27R, OTS can set tool length and diameter of rotating tools and
perb broken tool detection. OTS is available in two configurations – OTS ?AA and OTS AA. OTS can be used with the OMI?2, OMI?2T or OMM-2/OSI interface. OMI-2T or OMM-2/OSI must be used
if OTS is to be paired with another optical transmission probe. Sense directions ±X, ±Y, +Z X and Y: ±10° Stylus overtravel Z: 5.5 mm (0.21 in) 130 gf – 240 gf Stylus trigger force 1.0 μm (0.00004 in)
Unidirectional repeatabilityMachine tool probes OTS retrofit kit OTS AA2-20 Includes: OTS ?AA or OTS AA probe OMM-2 optical receiver OMI-2T Receiver mounting bracket Part number: A-5492-0051
: 廈門紀揚986 Sealtite kit Renishaw tool setting software OMI-2 optical receiver Installation and application support Part number: A-5191-0049 : 廈門紀揚1,582 Part number: OTS-S (?AA configuration)
Part number: OTSAA-S (AA configuration) Available at fixed – call for details. Note: The retrofit questionnaire at the end of this section must be filled out and returned to Renishaw before a retrofit
order can be processed. OTS hardware only kit OMI-2T optical receiver Includes: OTS ?AA probe or OTS AA probe Part number: A-5439-0049 : 廈門紀揚1,582 OMI-2T Receiver mounting
bracket Receiver mounting bracket Sealtite kit Part number: A-2033-0830 : 廈門紀揚119 Part number: OTS-KIT : 廈門紀揚4,053 Part number: OTSAA-KIT : 廈門紀揚4,053 OTS ?AA probe kit
OSI interface Includes: OTS probe Part number: A-5492-2000 : 廈門紀揚931 ? AA battery (2) Tool kit Sealtite conduit for OMM-2, OMI-2 or OMI-2T Part number: A-5401-2001 : 廈門紀揚2,271
5/16 in conduit, 1 m long. Includes one fitting. OTS AA probe kit Part number: A-4113-0306 : 廈門紀揚27 Includes: OTS probe AA battery (2) Tool kit Part number: A-5514-2001 : 廈門紀
揚2,271
