產品詳情
混流泵的工作原理A望都混流泵的工作原理300HW-12
可以是同心接管。管路附件的選配管路附件的選配應貫徹既安全又經濟的原則。也就是說，既能保證機組的正常運行，又要選配最簡單的管路附件。以減少揚程損失。如濾網，在水源清潔無雜物的情況下，可不設置。底閥，在用真空能夠抽氣充水或用其它方法充水時，也可不用。出水管路上如能用拍門代替逆止閥，就盡量用拍門。除離心泵和混流泵采用閘閥外，進水管路和軸流泵出水管路都不應安裝閘閥。此外進、出水管路都要盡量減少彎管。對一個排灌站來說，究竟應設置哪些管路附件，應根據具體情況選配。有一句老話叫做“只有合腳的鞋才是好鞋”，而對于臥式混流泵來說也是如此，只有選擇合適的水泵才能更好的使用，合適的水泵才是我們所需要的水泵。所以如果我們需要選購臥式混流泵時要多加注意。
一.概述
1.用途：HW混流泵為臥式，單級，單吸，渦殼式混流泵。適用于輸送清水或物理，化學性質類似于水的其它液體。被輸送液體溫度不宜高于50度。廣泛用于農田灌溉，工業和城市排水等多種場合。HW泵的性能范圍：流量90-9000m3/h 揚程3.5-22m。
2. 特點：結構簡單，使用可靠，裝修方便，而且效率高，體型小，重量輕。jdhuiquan4.20
3. 傳動方式：用直接傳動和變速傳動。常用動力機是電動機和柴油機。訂貨 時應明確動力機的型號，以便確定聯軸器和皮帶輪的型號
4.型號說明：以150HW-8S例
150---------泵進出口直徑mm
8------------設計揚程 m
S------------變型代號
混流泵的工作原理A望都混流泵的工作原理300HW-12
低速用DA表示，用于鍋爐給水的多級離心泵，用DG表示。自吸離心泵自吸泵是靠泵自身的特殊結構而產生自吸作用的單級單吸離心泵，稱為自吸離心泵。和普通離心泵相比，在泵體結構上有顯著差別：一是泵進口位置提高，有時還裝上閥；二是在出水側設置了一個氣水分離室。泵外自吸泵，是在泵外加有自吸裝置，如帶有旋渦泵、水環真空泵、射流泵以及手動泵等。自吸泵與普通離心泵相比，具有結構緊湊、使用操作簡單，不但省去了起動前灌大量引水的麻煩，也省去了進水管低閥。減少了進水阻力，增加泵的出水量，但與同規格的普通離心泵的效率相比要低3%～5%。自吸泵較多的是應用在輕小型噴灌機組和管道灌機組上。自吸離心泵品種規格較多，有ZX型、TC型、BPZ型和ZB型等。
二.結構和作用
混流泵的工作原理A望都混流泵的工作原理300HW-12
The materials for the Water Guide pipe, the pump body and the pump cover are cast iron. There are infiltrating grooves on the inner surface of the rubber guide bearing near the wheel, and the guide bearing is mounted directly in the housing of the pump body, which can be replaced on site after wear. The rolling bearings contained in the pump cover are two single-row phase ball bearings. The main factory producing guanting is Fujian Youxi guanting factory. (Ix) Manual pumping of labor-driven piston pumps, diaphragm pumps and screw pumps and other water extrb tools, collectively referred to as manual pumps. Manual pumps are divided into shallow well dynamic pumps and deep wells manual pumps. The flow rate of shallow well piston pump is 0.34~4.214 cubic meter/time, adapt to the suction process 2~7 meters. The flow rate of the deep well piston pump is 0.056~0.601 cubic meters/When the head is 15~40 m. The flow rate of the diaphragm pump is 0.8~6.01 cubic meters/when the flow rate of the screw pump is 0.056~0.671 cubic meter/time. (10) The pump shell of the pump is generally cast iron, it is easy to crack under the b of mechanical force or thermal stress.1.HW pump mainly has pump cover, impeller, pump body, pump shaft, bushing, and bearing body and other major components. The pump cover is connected with the pump body and the inlet pipe respectively. 2. There should be an appropriate gap between the pump cover plane and the impeller plane. The gap is too small will produce friction, the gap is too large, will lead to the pump body pressure water a large number of reflux, is the pump efficiency reduction. The suitable gap used in practice is 0.3-0.7mm, and the gap can be adjusted by adding and subtracting the thickness of the paper pad.
3. The shaft is applied to protect the pump shaft and should be replaced in time after wear.
1. Screw holes at the upper end of the pump body, used for filling water diversion or connecting vacuum pump pumping gas to divert water.
2. In order to expand the scope of application of the pump to meet the different needs of users, can cut the outer diameter of the impeller or exchange different perbance of the impeller.
Water pump, valve and accessories technology R & amp; d and Sales: motor, bearings, mechanical seals, bl Products Sales: Pump assembly and maintenance: self-and with all kinds of goods and technology import and export business (except for goods and technologies that the state limits the company to operate or prohibit imports and exports).
訂貨須知：用戶在訂貨（或簽訂技術協議）時，請注明：
1、 使用工況：流量、揚程、漿體濃度及比重、粒徑、吸入形式、傳動方式等；
2、 配套電視：型號、主要技術參數、防護等級、生產廠家等；
3、 其它配套項目：如泵的備件、專用工具、調速裝置等；
4、 其它特殊要求。
制作與出售效力的綜合性企業。公司具有先進的出產設備和各種高精度的檢測儀器設備（水泵壽數實驗，機械功能實驗，微機測驗中心等），有用的保證了產品的質量。是一家致力于流體產品的研制河北會泉泵業有限公司系合資企業。暖通，電力，修建，環保等不同范疇的好評。在繼續投入新產品的技術研制和導入新科技和一起，奧特更重視產品細節，展示產品更專業的體系處理方案和更方便，更完善的售前，售中，售后效力。通過吸收，轉化，會集本身優勢，使產品不斷優化，決心立異，進一步確立了在同工作中的技術優勢。至今已向商場供給數萬臺（套）產品，深受化工，消防，造紙。在2000年冶金。成功從德國引入多種類型的技術。效力社會”的運營理念，向現代化高科技企業堅實地跨進。
