產品詳情
品牌美國cimetrics
內置防火墻有防火墻
插槽數2
型號bacnet/ip to arcnet router
傳輸速率1000mbps
vpn支持vpn
oem可oem
支持協議bacnet/ip to arcnet router
展開
帶防火墻功能的bacnet路由器bacnet/ip路由器
點我去除廣告
bacnet/ip路由器bacnet arcnet路由器bacnet/ip到arcnet 路由器
bacnet/ip網關，bacnet/ip交換機，arcnet路由器，bacnet arcnet路由器，bacnet arcnet交換機
bacnet arcnet網關
br2 router – bacnet network router
the br2-a - bacnet router provides routing between bacnet/ip, and bacnet arcnetnetworks. this allows integrators to mix and match these two bacnet network datab technologies within a single bacnet internetwork.
the br2 router is enclosed in a bl case that can be mounted standalone or in a 1u rack space. the unit has one arcnet connector and one ethernet 10/100 rj45 connector.
the arcnet connector is an industry standard bnc connectore for 93 ohm (rg62) cable. it operates at the standard 2.5 mbps and by default uses normal timeouts though it can be set for one of the three available arcnet extended timeouts settings used in long cable run segments. logically and physically 254 devices can be addressed. the arcnet is not terminated internally to give the user flexibility in connections and topologies used.
the ethernet port uses a standard shielded rj45 connector with integral leds. connection status can quickly be ascertained from the b and activity leds on each interface.
an bded web server allows for commissioning and configuration and troubleshooting via a standard web browser. a power led is present along with the leds for interface status on each interface.
flexible routing between:
bacnet/ip and arcnet
bacnet ethernet and arcnet
ip network support:
web server for commissioning and troubleshooting
status page for diagnostics
secure login to web configuration and status interfaces
bacnet/ip broadcast management device capability (bbmd)
foreign device support (fd)
bacnet device b support
standard communications:
10/100 mbps ethernet.
industry standard arcnet with surge protection
flexible external arcnet termination
convenient installation
12 vdc at under 50w
available 1u server rack mount shelf
available din rail mounting bracket.
overall specifications:
power: 12vdc at under 50w
operating temperatures: 0 to 40?c
storage temperature: -20 to 80?c
relative humidity: 10-95% non condensing
ethernet:
ieee 802.3 10/100 mbps
10baset, 100basetx phsyical. rj45 connectors
half/full duplex
100m (max) cat5 cable length.
leds: b and activity as labelled.
arcnet:
ansi/ashare 135 (iso 16484-5)
2.5 mbps data rate
rg-62 93ohm coaxial bus physical layer
1200m (abs max) cable length
(rule of thumb: nodes x km length x termination and dielectric flaws should not exceed three)
leds: b and activity as labelled.
regulatory compliance:fcc and ce marked
options:
rack mounting kit.
external network surge protector.
connecting bacnet arcnet network and a bacnet/ip network
bacnet has the same protocol for the monitoring, automation and field levels. it is unified top to bottom. bacnet field controllers with direct i/o and application specific features (b-asc) can communicate all the way up to bacnet/ip operator workstations (b-ows) and bacnet building controllers (b-bc).
in order to interconnect such levels, a bacnet router is needed. the cimetrics br2-a is such a bacnet router. for bacnet/ip the interface is 10/100 half/full duplex rj45 standard ethernet station-side. the arcnet side is 2.5 mbps using standard 93 ohm rg62u coaxial cable.
the bacnet/ip port on the br2-a connects to the network ethernet/tcpip port using a standard cat5 cable. the arcnet port connects to the target bacnet arcnet lan (93 ohm rg62u coaxial cable . the br2-a can be powered from any 120vac source. the br2-a is setup using its bded webpages.
the arcnet lan must have a bacnet network number unique from the bacnet network number assigned to the bacnet/ip network connection. nothing precludes the use of multiple br2-a routers in the same arcnet network as long as unique bacnet network (and arcnet lan mac) assignments are made for each created bacnet/ip configuration access network.
bridging bacnet automation and field levels with multiple routers
multiple bacnet routers can reside within the same bacnet internetwork. a group of arcnet devices located along an arcnet lan, spread in any fashion which adheres to the arcnet cabling rules, can be bridged to a bacnet/ip network with a bacnet router. so too can any others like arcnet, mstp (or any supported bacnet datab) be attached using another bacnet router.
this means of extension is often better than extending existing arcnet (or mstp) networks using repeaters. it can also help alleviate lan loading problems with token collisions, node numbers and cable lengths.
the bacnet/ip port on the br2-a connects to the main network ethernet/tcpip port using a standard cat5 cable. the arcnet port connects to the target bacnet arcnet lan (93 ohm rg62 coaxial cable). the br2-a can be powered from any 120vac source. the br2-a is setup using its bded webpages.
the arcnet lan must have a bacnet network number unique from the bacnet network number assigned to the bacnet/ip network connection. nothing precludes the use of multiple br2-a routers ion the same arcnet network as long as unique bacnet network (and arcnet lan mac) assignments are made for each created bacnet/ip configuration access network.
commissioning a bacnet arcnet device using a bacnet/ip laptop or other commissioning computer
to commission bacnet arcnet devices one has generally been forced to use a special pc hardware arcnet interface to communicate with the arcnet rs485 or coaxial lan. the secret is that most bacnet arcnet software can be run against bacnet/ip and communicate via bacnet routing to bacnet arcnet to achieve this configuration/setup connectivity. the cimetrics br2-a can accomplish this connectivity. the bacnet/ip port on the br2-a connects to the pc’s ethernet/tcpip port using a standard cat5 cable. the arcnet port connects to the target bacnet arcnet lan (93 ohm rg62 coaxial cable). the br-a can be powered from any 120vac source.
the br2-a is setup using its bded webpages. the baud rate of the bacnet arcnet port is setup to match the baud rate and network number of the existing arcnet lan.
the arcnet lan must have a bacnet network number unique from the bacnet network number assigned to the bacnet/ip network connection created by the pc connection. nothing precludes the use of multiple br2-a routers ion the same arcnet network as long as unique bacnet network (and arcnet lan mac) assignments are made for each created bacnet/ip configuration access network
bacnet/ip路由器bacnet arcnet路由器bacnet/ip到arcnet 路由器
bacnet/ip網關，bacnet/ip交換機，arcnet路由器，bacnet arcnet路由器，bacnet arcnet交換機
bacnet arcnet網關
內置防火墻有防火墻
插槽數2
型號bacnet/ip to arcnet router
傳輸速率1000mbps
vpn支持vpn
oem可oem
支持協議bacnet/ip to arcnet router
展開
帶防火墻功能的bacnet路由器bacnet/ip路由器
點我去除廣告
bacnet/ip路由器bacnet arcnet路由器bacnet/ip到arcnet 路由器
bacnet/ip網關，bacnet/ip交換機，arcnet路由器，bacnet arcnet路由器，bacnet arcnet交換機
bacnet arcnet網關
br2 router – bacnet network router
the br2-a - bacnet router provides routing between bacnet/ip, and bacnet arcnetnetworks. this allows integrators to mix and match these two bacnet network datab technologies within a single bacnet internetwork.
the br2 router is enclosed in a bl case that can be mounted standalone or in a 1u rack space. the unit has one arcnet connector and one ethernet 10/100 rj45 connector.
the arcnet connector is an industry standard bnc connectore for 93 ohm (rg62) cable. it operates at the standard 2.5 mbps and by default uses normal timeouts though it can be set for one of the three available arcnet extended timeouts settings used in long cable run segments. logically and physically 254 devices can be addressed. the arcnet is not terminated internally to give the user flexibility in connections and topologies used.
the ethernet port uses a standard shielded rj45 connector with integral leds. connection status can quickly be ascertained from the b and activity leds on each interface.
an bded web server allows for commissioning and configuration and troubleshooting via a standard web browser. a power led is present along with the leds for interface status on each interface.
flexible routing between:
bacnet/ip and arcnet
bacnet ethernet and arcnet
ip network support:
web server for commissioning and troubleshooting
status page for diagnostics
secure login to web configuration and status interfaces
bacnet/ip broadcast management device capability (bbmd)
foreign device support (fd)
bacnet device b support
standard communications:
10/100 mbps ethernet.
industry standard arcnet with surge protection
flexible external arcnet termination
convenient installation
12 vdc at under 50w
available 1u server rack mount shelf
available din rail mounting bracket.
overall specifications:
power: 12vdc at under 50w
operating temperatures: 0 to 40?c
storage temperature: -20 to 80?c
relative humidity: 10-95% non condensing
ethernet:
ieee 802.3 10/100 mbps
10baset, 100basetx phsyical. rj45 connectors
half/full duplex
100m (max) cat5 cable length.
leds: b and activity as labelled.
arcnet:
ansi/ashare 135 (iso 16484-5)
2.5 mbps data rate
rg-62 93ohm coaxial bus physical layer
1200m (abs max) cable length
(rule of thumb: nodes x km length x termination and dielectric flaws should not exceed three)
leds: b and activity as labelled.
regulatory compliance:fcc and ce marked
options:
rack mounting kit.
external network surge protector.
connecting bacnet arcnet network and a bacnet/ip network
bacnet has the same protocol for the monitoring, automation and field levels. it is unified top to bottom. bacnet field controllers with direct i/o and application specific features (b-asc) can communicate all the way up to bacnet/ip operator workstations (b-ows) and bacnet building controllers (b-bc).
in order to interconnect such levels, a bacnet router is needed. the cimetrics br2-a is such a bacnet router. for bacnet/ip the interface is 10/100 half/full duplex rj45 standard ethernet station-side. the arcnet side is 2.5 mbps using standard 93 ohm rg62u coaxial cable.
the bacnet/ip port on the br2-a connects to the network ethernet/tcpip port using a standard cat5 cable. the arcnet port connects to the target bacnet arcnet lan (93 ohm rg62u coaxial cable . the br2-a can be powered from any 120vac source. the br2-a is setup using its bded webpages.
the arcnet lan must have a bacnet network number unique from the bacnet network number assigned to the bacnet/ip network connection. nothing precludes the use of multiple br2-a routers in the same arcnet network as long as unique bacnet network (and arcnet lan mac) assignments are made for each created bacnet/ip configuration access network.
bridging bacnet automation and field levels with multiple routers
multiple bacnet routers can reside within the same bacnet internetwork. a group of arcnet devices located along an arcnet lan, spread in any fashion which adheres to the arcnet cabling rules, can be bridged to a bacnet/ip network with a bacnet router. so too can any others like arcnet, mstp (or any supported bacnet datab) be attached using another bacnet router.
this means of extension is often better than extending existing arcnet (or mstp) networks using repeaters. it can also help alleviate lan loading problems with token collisions, node numbers and cable lengths.
the bacnet/ip port on the br2-a connects to the main network ethernet/tcpip port using a standard cat5 cable. the arcnet port connects to the target bacnet arcnet lan (93 ohm rg62 coaxial cable). the br2-a can be powered from any 120vac source. the br2-a is setup using its bded webpages.
the arcnet lan must have a bacnet network number unique from the bacnet network number assigned to the bacnet/ip network connection. nothing precludes the use of multiple br2-a routers ion the same arcnet network as long as unique bacnet network (and arcnet lan mac) assignments are made for each created bacnet/ip configuration access network.
commissioning a bacnet arcnet device using a bacnet/ip laptop or other commissioning computer
to commission bacnet arcnet devices one has generally been forced to use a special pc hardware arcnet interface to communicate with the arcnet rs485 or coaxial lan. the secret is that most bacnet arcnet software can be run against bacnet/ip and communicate via bacnet routing to bacnet arcnet to achieve this configuration/setup connectivity. the cimetrics br2-a can accomplish this connectivity. the bacnet/ip port on the br2-a connects to the pc’s ethernet/tcpip port using a standard cat5 cable. the arcnet port connects to the target bacnet arcnet lan (93 ohm rg62 coaxial cable). the br-a can be powered from any 120vac source.
the br2-a is setup using its bded webpages. the baud rate of the bacnet arcnet port is setup to match the baud rate and network number of the existing arcnet lan.
the arcnet lan must have a bacnet network number unique from the bacnet network number assigned to the bacnet/ip network connection created by the pc connection. nothing precludes the use of multiple br2-a routers ion the same arcnet network as long as unique bacnet network (and arcnet lan mac) assignments are made for each created bacnet/ip configuration access network
bacnet/ip路由器bacnet arcnet路由器bacnet/ip到arcnet 路由器
bacnet/ip網關，bacnet/ip交換機，arcnet路由器，bacnet arcnet路由器，bacnet arcnet交換機
bacnet arcnet網關
