產品詳情
INCONEL? 82 焊絲AWS A5.14，ERNiCr-3隨貨質保書
INCONEL 82 焊絲用于熔化極氣體保護焊、鎢極惰性氣體保護焊和埋弧焊等方法焊接INCONEL 600\601\690合金，INCOLOY 800\800HT\330合金，還可用于鋼材的表面堆焊。用NI-ROD 99焊絲進行埋弧焊時應使用INCOFLUX 4埋弧焊劑。當用INCOFLUX 6埋弧焊劑進行埋弧焊時，焊道層數最多為三層。
用INCONEL82 焊絲形成的焊縫金屬具有較高的強度和較好的耐蝕性，在高溫下具有較好的抗氧化能力和較高的蠕變破裂強度。
另外，INCONEL82 焊絲還具有廣泛的應用范圍,可以用于異種材料的焊接，如INCONEL系列合金、INCOLOY系列合金的焊接，或INCOLOY 330合金與鎳、MONEL系列合金和不銹鋼以及碳鋼的焊接，它也可用于焊接不銹鋼與鎳基合金或碳鋼。
|
AWS A5.14，ERNiCr-3 VdTüV 2117.00;2118.00, 規格 ASME Ⅱ,SFA-5.14, ERNiCr-3 2110-00;2111.00 MIL-E-21562 DIN 1736 SG-NiCr20Nb Types MIL-RN82,MIL-EN82 Werkstoff Nr.2.4806 MIL-RN82H,MIL-EN82H UNS N06082 ASME Ⅸ,F-No.F43 ISO SNi6082 BS 2901(NA35) Europe NiCr20Mn3Nb
|
|
Nia---------- 67.0 min Si ----------- 0.50 max 化學 C ---------- 0.10 max Cr ---------- 18.0-22.0 成份 Mn ---------- 2.5-3.5 Ti-------------0.75 max Fe ---------- 3.0 max Nbb--------------2.0-3.0 S -------- 0.015 max P ----------- 0.030 max Cu --------- 0.50 max 其它 --------- 0.50 max
|
|
A添加Co，當特別要求時Co最大含量為0.12 B添加Ta，當特別要求時Ta最大含量為0.30
最低 拉伸強度，psi 80,000 機械 MPa 552 性能 延伸率，(4d）% 30 |
焊絲可以以線卷或直線狀供貨，并有幾種不同直徑可供選擇，如下表所示:
產品
|
mm |
0.8 |
0.9 |
1.0 |
1.14 |
1.2 |
1.6 |
2.4 |
3.2 |
|
in |
0.030 |
0.035 |
0.040 |
0.045 |
0.047 |
0.062 |
0.093 |
0.125 |
供貨
狀態
直線長度--915 mm(36”)或1000 mm(39”)
INCONEL ? 82 wire
INCONEL 82 wire is used to weld INCONEL 600\601\690 alloy, INCOLOY 800\800HT\330 alloy, and can also be used for surfacing of steel for melting gas welding, tungsten inert gas shielded welding and submerged arc welding. INCOFLUX 4 submerged arc welding agent should be used for the submerged arc welding with NI-ROD 99 welding wire. When the submerged arc welding of INCOFLUX 6 is used, the maximum number of weld layer is up to three layers.
The weld bl bed with INCONEL82 electrode has a high strength and good corrosion resistance, and has good antioxidant capacity and high creep rupture strength at high temperature.
In addition, INCONEL82 wire has wide application range, can be used for welding of dissimilar materials, such as INCONEL alloy series, series of INCOLOY alloy welding, or INCOLOY 330 alloy with nickel, MONEL alloy and stainless steel and carbon steel welding, it also can be used for welding stainless steel and nickel base alloy or carbon steel.
AWS A5.14, ernicr-3 VdTuV 2117.00; 2118.00,
ASME specifications Ⅱ, SFA - 5.14, ERNiCr - 3 2110-00; 2111.00
MIL - E - 21562 DIN 1736 SG - NiCr20Nb
Types MIL - RN82, MIL - EN82 Werkstoff Nr. 2.4806
MIL - RN82H, MIL - EN82H UNS N06082
ASME Ⅸ, F - No. F43 ISO SNi6082
BS 2901 (NA35) Europe NiCr20Mn3Nb
Nia -- -- -- -- -- -- -- -- -- -- 67.0 min Si -- -- -- -- -- -- -- -- -- -- - 0.50 Max
Chemical C -- -- -- -- -- -- -- -- -- -- 0.10 Max Cr -- -- -- -- -- -- -- -- -- - 18.0-22.0
Comb of Mn -- -- -- -- -- -- -- -- -- - 2.5-3.5 Ti -- -- -- -- -- -- -- -- -- -- -- -- -- 0.75 Max
Fe -- -- -- -- -- -- -- -- -- -- 3.0 Max Nbb -- -- -- -- -- -- -- -- -- -- -- -- -- - 2.0-3.0
S -- -- -- -- -- -- -- -- 0.015 Max P -- -- -- -- -- -- -- -- -- -- - 0.030 Max
Cu -- -- -- -- -- -- -- -- -- 0.50 Max other -- -- -- -- -- -- -- -- -- 0.50 Max
A add Co, the maximum amount of Co is 0.12 when required
The maximum content of Ta is 0.30 when the special request is made
Minimum tensile strength, psi 80,000
Mechanical 552 MPa
Perbance extension rate (4d) % 30
The wire can be supplied in a reel or straight line, with several different diameters to choose from, as shown in the following table:
products
Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2
In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125
supply
state
Linear length -915 mm(36 ") or 1000 mm (39)
