產品詳情
INCONEL? 152焊條
INCONEL? 152焊條 手工電弧焊的方法焊接提供材質書
INCONEL 152焊條主要用于手工電弧焊的方法焊接INCONEL 690合金。這種焊條中鉻的含量較高，這提高了其在核輻射條件下純水環境中抗應力腐蝕開裂的能力。用這種焊條在任何焊接位置都可以焊出高質量的焊縫。這種焊條還可以在所有的低碳鋼或低合金鋼表面形成耐蝕堆焊防護層，還可以用來焊接INCONEL 690合金制造處理核廢料的所謂的“玻璃熔爐”。另外，INCONEL 152焊條具有廣泛的應用范圍可以用于異種材料的焊接，如焊接INCONEL和INCOLOY系列合金、不銹鋼、低合金鋼和低碳鋼。
INCONEL152焊條應采用直流正接的方式，并適用于全位置焊接。
|
AMSE Boiler&Pressure Vessel Code Case 2143 規格 AWS A5.11 ENiCrFe-7 UNS W86152 ASME Ⅱ,SFA 5.11, ENiCrFe-7 ISO ENi 6152 ASME Ⅸ,F-No.F43 Europe ENiCr30Fe9Nb
|
|
Ni+Co---------- 剩余 Cu ----------- 0.50 max 化學 C --------- 0.05 max Cr ---------- 28.0-31.5 成份 Mn --------- 5.0 max Ti----------- 0.50 max Fe -------- 7.0-12.0 Al ---------- 0.50 max S ------- 0.015 max P ----------- 0.03 max Si -------- 0.75 max Nb+Ta -------- 1.0-2.5 Mo ---------0.50 max 其它 -------- 0.50 max
|
|
最低 拉伸強度，psi 80,000 機械 MPa 552 性能 延伸率，(4d）% 30
|
|
直徑 |
mm |
2.4 |
3.2 |
4.0 |
4.8 |
|
|
in |
3/32 |
1/8 |
5/32 |
3/16 |
|
長度 |
mm |
229 |
356 |
356 |
356 |
|
|
in |
9 |
14 |
14 |
14 |
|
電流 |
A |
45-65 |
75-100 |
95-130 |
125-165 |
產品
供貨
狀態
INCONEL ? 152 electrode
INCONEL 152 welding rod is mainly used to weld INCONEL 690 alloy by manual arc welding. The content of chromium in this electrode is high, which improves the ability of the anti-stress corrosion cracking in the pure water environment under the condition of nub radiation. High quality welds can be soldered in any welding b with this electrode. The electrode can also b an anticorrosive surface-resistant layer on all low carbon steel or low alloy steel surfaces and can be used to weld INCONEL 690 alloy to produce the so-called "glass furnace" of nub waste disposal. In addition, INCONEL 152 electrode has a wide range of applications to be used for welding of heterogeneous materials, such as welding INCONEL and INCOLOY series alloy, stainless steel, low alloy steel and low carbon steel.
INCONEL152 electrode shall be used for direct current connection and shall be applicable to all b welding.
AMSE Boiler&Pressure Vessel Code Case 2143
Specification AWS A5.11 enicrfe-7 UNS W86152
ASME Ⅱ, SFA ENiCrFe - 5.11 ISO 6152 ENi
ASME Ⅸ, F - No. F43 Europe ENiCr30Fe9Nb
Ni + Co -- -- -- -- -- -- -- -- -- -- residual Cu -- -- -- -- -- -- -- -- -- -- - 0.50 Max
Chemical C -- -- -- -- -- -- -- -- - 0.05 Max Cr -- -- -- -- -- -- -- -- -- - 28.0-31.5
Comb of Mn -- -- -- -- -- -- -- -- -- 5.0 Max Ti -- -- -- -- -- -- -- -- -- -- - 0.50 Max
Fe -- -- -- -- -- -- -- -- - 12.0 - Al - 7.0-0.50 Max
S -- -- -- -- -- -- -- 0.015 Max P -- -- -- -- -- -- -- -- -- -- - 0.03 Max
Si -- -- -- -- -- -- -- -- 0.75 Max Nb + Ta -- -- -- -- -- -- -- - 1.0-2.5
Mo -- -- -- -- -- -- -- -- -- 0.50 Max other -- -- -- -- -- -- -- -- 0.50 Max
Minimum tensile strength, psi 80,000
Mechanical 552 MPa
Perbance extension rate (4d) % 30
Diameter mm 2.4 3.2 4.0 4.8
In 3/32, 1/8, 5/32, 3/16
Length mm 229 356 356 356
14 14 14 14 14 14
Current A 45-65, 755-1005-135-135-165
products
supply
state
